Metallurgical Supply

Metallurgical Supply

Our full range of Metallurgical Supply and Equipment, Consumables range from Sectioning machines, Mounting Systems, Grinding and Polishing to all related consumables like diamond slurry, SiC disc and polishing cloths. Quasi-S has added advantages in comparison to many other trading companies is that we have three FA Analysis Labs to demo and showcase all the Metallurgical Supplies offered. You may enter here to find out more about the services we have:

Click to Advance Analytical Services

Showing 1–20 of 35 results

  • Micro Hardness Tester JapanQuick view

    Highwood Digital Hardness Testers

    Request for Quotation

     

     

    HW flyerpng_Page1

    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Sonohard Ultrasonic Hardness tester JapanQuick view

    Sonohard Ultrasonic Handy Hardness Tester

    Request for Quotation

     
    Sonohard Ultrasonic Hardness testerpng_Page1
    Sonohard Ultrasonic Hardness testerpng_Page4
    Sonohard Ultrasonic Hardness testerpng_Page2

    Sonohard Ultrasonic Hardness testerpng_Page3

  • Slurry Diamond Sample Preparation ConsumableQuick view

    QUASI-S ADAMAS® DIAMOND SLURRY

    Request for Quotation

    .

    Sample Preparation can be efficiently done by this specially designed product we offer.  Adamas® Diamond Polishing Slurry offers a wide range of choice for all industrial polishing purposes.  Our Liquid Diamond comes with different grind-structures and is available in Oil, Water, and Emulsion. Handy spray bottles are provided to offer optimum dispensation and minimise wastage. Many failure analysis service labs are using this product.

    Learn more about Sample Preparation and the choice of Consumables below:Click to Sample Preparation Flow Chart


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Polishing Lapping Film Sample Preparation ConsumableQuick view

    QUASI-S ADAMAS® LAPPING FILMS

    Request for Quotation

    .

    Our Adamas® lapping films are manufactured with precision graded minerals carefully embedded onto the Polyester Backing sheet.

    They are easy to use and come in many standard sizes and colors for identification


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Polishing Diamond Powder Sample Preparation ConsumableQuick view

    QUASI-S ADAMAS® MONOCRYSTALLINE DIAMOND POWDER

    Request for Quotation

    .

    With metal impurity controlled below 100ppm and a large range of grits for customer's preference, Adamas® MonoCrystalline Diamond provides best value for money without compromising its quality and effectiveness of polishing.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Epoxy Hardener Sample preparationQuick view

    QUASI-S ADAMAS® MOUNTING EPOXY

    Request for Quotation

    .

    Rapid cure, yet low shrinkage and excellent filling are the 3 main features of our Mounting Epoxy.   Without compromising the original state of evidence during samples preparation, our Adamas® compounds are carefully manufactured and available in both hot and cold curing. This product is most frequently use by service labs that demand strictest performance. It is packed in 1 Quart for Epoxy and 8 Oz for hardener, the correct ratio for 4:1 ratio.

    Demo of usage for these epoxy can be provided at our Failure Analysis Service Lab.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Polishing Diamond Powder Sample Preparation ConsumableQuick view

    QUASI-S ADAMAS® NANO DIAMOND POWDER

    Request for Quotation

    .

    Produced by very high pressure and temperature, Adamas® ultra fine diamond to achieve below 0.2nm surface roughness. It is best used in high precision lapping and polishing. This product is most frequently use by failure analysis service labs.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Slurry Polishing Sample Preparation ConsumableQuick view

    QUASI-S ADAMAS® POLISHING SLURRY

    Request for Quotation

    .

    Mineral Polishing Slurry are specially formulated to yield superior results for consistency and finishing. They can provide close to perfect finishing in optical materials, hard-disc  substrates, fibre optic connectors, magnetic head, etc.

    Many Failure Analysis service labs have reviewed and claimed that the uniformity in polishing particle size had given high removal rate and consistency.  Many major metallurgical supply companies are also using Quasi-S slurry for their main source of supply.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Polishing Tape Diamond Sample Preparation ConsumableQuick view

    QUASI-S ADAMAS® POLISHING TAPES

    Request for Quotation

    .

    Uniformity in coating of abrasive minerals is the best feature of Adamas® Polishing Tapes.

    They offer excellent consistency and high removal rate, especially effective on curved surfaces. Available for oil, water and dry polishing.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Polishing Diamond Powder Sample Preparation ConsumableQuick view

    QUASI-S ADAMAS® POLYCRYSTALLINE DIAMOND POWDER

    Request for Quotation

    .

    Adamas® Polycrystalline Diamond is known for its excellent removal rate and yet provides scratch-free polishing to hard materials such as crystal, tungsten carbide, sapphire etc.  It is made possible by its self-sharpening as well as the regeneration of new cutting edges while in use.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • SiC abrasive disc polishing sandpaperQuick view

    QUASI-S ADAMAS® SiC Abrasive Polishing Disc Paper

    Request for Quotation

    .

    Adamas® Abrasive SiC discs are inseparable parts of sample preparation. They are specially formulated and produced for efficiency and durability. They come in different grits(60~4000) and diameters(8"~12" or 200~300mm) Waterproof paper, with and without pressured adhesive backings.  These product we have is by far the most sought after Metallurgical supply items here in the region market.

    Generally, most manufactures are using electrostatic means to deposit abrasive grains onto paper. These method, when used in finest grit will result in all the grains to align and face the same direction, with the cutting edge point upward. This will cause unwanted scratches at the final polishing stage.  Adamas® paper are produced with method which allow grains to deposit randomly and thus less aggressive when use.

    Contact us to provide you reports and samples to experience the above claim. Demo of usage for these polishing papers can be provided at our Failure Analysis Service Lab.

    See more in Metallurgical Supply ....

     

     

    ENTER HERE.. TO SEE PRACTICAL USAGE OF CONSUMABLES

    Polishing Recipe

  • Slurry Silica AlO2 Sample Preparation ConsumableQuick view

    QUASI-S ADAMAS® SILICA SLURRY

    Request for Quotation

    .

    Produced with superior quality colloidal silica powder in deionized water, Adamas® Silica Slurry promised to give excellent chemical and mechanical interaction between work piece and medium.  It is especially critical at the final phase of sample preparations. With alkaline and acidic based and grit size selection, customer can optimize the process with ease. This product is essential by any failure analysis service labs. Call us for testing samples.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Polishing Powder Sample Preparation ConsumableQuick view

    QUASI-S ADAMAS® ULTRA FINE Al2O3 POLISHING POWDER

    Request for Quotation

    .

    Our Adamas® UF Powder are manufactured with excellent crystal shape (Al2O3)  and 99.99% purity level.  It is best suited for Hard Disk, Fibre Optic and Semiconductor polishing. It is recommended by many  failure analysis service labs as well.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Automatic Mounter Sample Preparation ATMQuick view

    ATM OPAL 480 Automatic Mounter

    Request for Quotation

    .

    The OPAL 480 is a fully hydraulic, water cooled hot mounting press for mounting samples before polishing. The process sequence is executed automatically. The fully automatic sliding closure allows quick and easy opening/closing of the mould assembly. Mould assemblies can be exchanged quickly and without tools. Also rectangular moulds can be produced. The robust aluminium construction is powder coated. With its solid construction and ATM hydraulic system, the operating noise of the machine is minimized.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Automatic Mounter Sample Preparation ATMQuick view

    ATM OPAL 460 Automatic Mounter

    Request for Quotation

    .

    The OPAL 460 is a fully hydraulic, water cooled hot mounting press for mounting samples before polishing. The process sequence is executed automatically. The fully automatic sliding closure allows quick and easy opening/closing of the mould assembly. Mould assemblies can be exchanged quickly and without tools. The robust aluminium construction is powder coated. With its solid construction and ATM hydraulic system, the operating noise of the machine is minimized.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Automatic Mounter Sample Preparation ATMQuick view

    ATM OPAL 410 Automatic Mounter

    Request for Quotation

    .

    The OPAL 410 is a fully hydraulic, water cooled hot mounting press for mounting samples before polishing. The process sequence is executed automatically. Mould assemblies can be exchanged quickly and without tools. The robust aluminium construction is powder coated. With its solid construction and ATM hydraulic system, the operating noise of the machine is minimized.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Micro-Hardness Tester Sample Preparation ATMQuick view

    ATM CARAT 930 Micro-Hardness Tester

    Request for Quotation

    .

    The latest technology and intuitive application make the CARAT 930 into an extraordinary product for micro-hardness testing and optical evaluation. Measurements are performed highly precisely and easily through new, unrivalled methods. Our robust basic unit can be optimally suited to your requirements with our own in-house software modules and the Carat sample clamping system.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Dosing unit Diamond Suspensions and Lubricants ATMQuick view

    ATM Topas 130 Dosing unit for Diamond Suspensions and Lubricants

    Request for Quotation

    .

    The dosing unit for diamond suspensions and lubricants can be used universally. The dosing interval is adjustable. Topas 130 in automatic mode (Rubin 500), the dosage is automatically switched on and off in the process. A reverse rinsing function keeps the hoses clean.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

    ]
  • Wheel Grinder Sample Preparation ATMQuick view

    ATM Saphir 550 with Rubin 540 Single Wheel Grinder

    Request for Quotation

    .

    The Saphir 550 with Rubin 540 is a single wheel grinder and polisher for working wheels Ø 200–300 mm. The especially strong, speed controlled drive allows the strongest pressures. The clearly arranged and robust menu display enables user friendly operation. The parallel grinding unit of the Rubin 540 moves the exposed sample holder in clockwise/anticlockwise rotation with variable speed across the working area. Pressing down the samples just by their own weight ensures a gentle preparation of pressure-sensitive and delicate specimen. The shock-resistant plastic basin, powder coated Aluminium housing and high standard of technology inside the unit lend the requisites for quiet and smooth running.


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!

  • Wheel Grinder Sample Preparation ATMQuick view

    ATM Saphir 550 with Rubin 520 Single Wheel Grinder

    Request for Quotation

    .

    The Saphir 550 with Rubin 520 is a single wheel grinder and polisher of recent generation with an innovative grinding and polishing head for working wheels Ø 250 - 300 mm. The head RUBIN 520 is equipped with an automatic protective hood and sets a new standard for operational safety. Single and central pressure, memory function, integrated dosing system, material removed measurement are only a few of the possibilities. Motor-driven height setting with pneumatic clamping and all characteristics of the basic unit Saphir 350 meet the highest demands.

     


    Please complete the form below downloading the brochure(s)

    After "Submit" -- please check your Email.
    The brochure will send to you immediately.
    If you do not receive, please verify your Email address again.
    Thank you!